Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
projects:re200 [2020/02/02 20:42] Andreas Böhlerprojects:re200 [2021/10/02 17:28] (current) – old revision restored (2020/02/03 22:23) Andreas Böhler
Line 1: Line 1:
 +~~NOTOC~~
 +
 ====== Linux/OpenWrt on the TP-Link RE200v1/RE200v2 ====== ====== Linux/OpenWrt on the TP-Link RE200v1/RE200v2 ======
  
Line 17: Line 19:
 The web interface upgrade requires a firmware image with bootloader. The upgrade also overwrite the boot loader and there is no failsafe mode present. If flashing goes wrong, the device is bricked. The web interface upgrade requires a firmware image with bootloader. The upgrade also overwrite the boot loader and there is no failsafe mode present. If flashing goes wrong, the device is bricked.
  
-In order to update from stock to OpenWrt, a specially prepared firmware image is necessary. I create a small tool to ease preparation of such an image: openwrt-imagetool. The source code is available at [[https://www.aboehler.at/hg/openwrt-imagetool|www.aboehler.at/hg/openwrt-imagetool]] and Windows binaries can be downloaded {{:projects:openwrt-imagetool.zip|here}}.+In order to update from stock to OpenWrt, a specially prepared firmware image is necessary. I created a small tool to ease preparation of such an image: openwrt-imagetool. The source code is available at [[https://www.aboehler.at/hg/openwrt-imagetool|www.aboehler.at/hg/openwrt-imagetool]] and Windows binaries can be downloaded {{:projects:openwrt-imagetool.zip|here}}.
  
 After starting the program, you simply select TP-Link RE200v1, an original firmware image (from TP-Link), OpenWrt image file and the output directory. The tool then creates the file 'openwrt-webif.bin' in the selected output directory after clicking on 'Process'. The tool comes without any warranty and usage is at your own risk. After starting the program, you simply select TP-Link RE200v1, an original firmware image (from TP-Link), OpenWrt image file and the output directory. The tool then creates the file 'openwrt-webif.bin' in the selected output directory after clicking on 'Process'. The tool comes without any warranty and usage is at your own risk.
Line 24: Line 26:
  
 The resulting openwrt-webif.bin can now be uploaded via the stock web interface. The resulting openwrt-webif.bin can now be uploaded via the stock web interface.
 +
 +==== Changelog and Download ====
 +
 +v0.2 - 2020/02/03 {{:projects:openwrt-imagetool.zip|openwrt-imagetool.zip}}.
 +  * Fixed a bug where the MD5 sum would net get updated
 +  * Check all images before processing
 +
 +v0.1 - 2020/01/31
 +  * Initial Public Release